Reference copy: Tire rules may be amended by bulletin. Confirm current requirements with DIRTcar, UMP and your track before competing.
UMP / DIRTCAR MODIFIED
Section 10 โ Wheels
- Bead locks are permitted on all four wheels. Inner bead locks are not permitted.
- Wheel discs must be fastened using at least three 5/16-inch or three 1/4-inch diameter magnetic-steel hex-head bolts.
- Wheel discs using any other fastener are not permitted.
- As an option, a wheel cover with at least five steel Zeus-fastener mounting points may be approved.
- Only 8-inch DIRTcar-approved and labeled racing wheels are permitted. Wheels must not weigh more than 30 pounds.
- All wheels must be conventional one-piece magnetic steel and mounted with lug nuts. Aluminum, plastic and carbon-fiber wheels are not permitted.
- All wheels must be fastened to the hub with five lug nuts.
- Wheel spacers are permitted and may only be magnetic steel or aluminum. Exotic heavy metals are not permitted. Spacers cannot exceed 1 inch thick or 6.5 inches outside diameter.
- Approved wheel-disc fastening systems include Keyser Manufacturing #100 7-101; Wehrs Manufacturing WM377A-312 aluminum 5/16 or WM377S-312 steel 5/16; Triple X Chassis SC-WH-7810 for a 1-inch spring or SC-WH-7820 for a 1 3/8-inch spring; Pit Stop USA; and Smith Precision Products MC-516-18.
Section 10 โ Tires
- The tire rule may be amended by bulletin.
- Only Hoosier M-30S and M-60 compounds in the DIRTcar-plated 26.5/8.0/15 or 27.5/8.0/15 tire are approved. Maximum tire width is 9 inches.
- The M-60 may be used as a right-rear option tire only.
- Grooving is not permitted. Grinding only. No grooving, needling or removal of material from the tire.
- Siping is permitted on M-30 and M-60 tires.
- Recapping an approved tire is not permitted.
- Track or DIRTcar officials may confiscate any tire at any time for evaluation, durometer verification or chemical analysis.
- Manufacturer identification markings may not be defaced or altered.
- Tire alteration may result in immediate suspension and other penalties.
- Tire softeners or chemicals designed to alter tire characteristics or the tire surface are not permitted.
Back to top
UMP / DIRTCAR STOCK CAR
Section 8 โ Wheels and Tires
- The tire rule may be amended by bulletin at any time.
- The only approved DIRTcar tires are the Hoosier M-30 and M-60 compounds. Maximum tire width is 9 inches.
- The M-30 or M-60 must be used on all four corners.
- Fully effective with the start of the weekly season.
- Siping and grinding are permitted.
- Grooving is permitted.
- Recapping an approved tire is not permitted.
- Track or DIRTcar officials may confiscate any tire at any time for evaluation, durometer verification or chemical analysis.
- Manufacturer identification markings may not be defaced or altered.
- Tire alteration may result in immediate suspension and other penalties.
- Tire softeners or chemicals designed to alter tire characteristics or the tire surface are not permitted.
- Only 8-inch racing wheels are permitted.
- Wheels must be conventional one-piece magnetic steel and mounted with lug nuts. Aluminum, plastic and carbon-fiber wheels are not permitted.
- All wheels must be fastened to the hub with five lug nuts.
- Bead locks are permitted on the right side only.
- Only approved wheel discs are permitted. They must use at least three 1/4-inch or 5/16-inch diameter magnetic-steel hex-head bolts.
- Approved wheel-disc fastening systems include Keyser Manufacturing #100 7-101; Wehrs Manufacturing WM377A-312 aluminum 5/16 or WM377S-312 steel 5/16; Triple X Chassis SC-WH-7810 for a 1-inch spring or SC-WH-7820 for a 1 3/8-inch spring; Pit Stop USA; and Smith Precision Products MC-516-18.
Back to top