DIRTcar Racing and UMP logo

Sanction tire guide

UMP / DIRTCAR RULES

Modified and Stock Car tire and wheel requirements.

Reference copy: Tire rules may be amended by bulletin. Confirm current requirements with DIRTcar, UMP and your track before competing.

UMP / DIRTCAR MODIFIED

Section 10 โ€” Wheels

  1. Bead locks are permitted on all four wheels. Inner bead locks are not permitted.
  2. Wheel discs must be fastened using at least three 5/16-inch or three 1/4-inch diameter magnetic-steel hex-head bolts.
  3. Wheel discs using any other fastener are not permitted.
  4. As an option, a wheel cover with at least five steel Zeus-fastener mounting points may be approved.
  5. Only 8-inch DIRTcar-approved and labeled racing wheels are permitted. Wheels must not weigh more than 30 pounds.
  6. All wheels must be conventional one-piece magnetic steel and mounted with lug nuts. Aluminum, plastic and carbon-fiber wheels are not permitted.
  7. All wheels must be fastened to the hub with five lug nuts.
  8. Wheel spacers are permitted and may only be magnetic steel or aluminum. Exotic heavy metals are not permitted. Spacers cannot exceed 1 inch thick or 6.5 inches outside diameter.
  9. Approved wheel-disc fastening systems include Keyser Manufacturing #100 7-101; Wehrs Manufacturing WM377A-312 aluminum 5/16 or WM377S-312 steel 5/16; Triple X Chassis SC-WH-7810 for a 1-inch spring or SC-WH-7820 for a 1 3/8-inch spring; Pit Stop USA; and Smith Precision Products MC-516-18.

Section 10 โ€” Tires

  1. The tire rule may be amended by bulletin.
  2. Only Hoosier M-30S and M-60 compounds in the DIRTcar-plated 26.5/8.0/15 or 27.5/8.0/15 tire are approved. Maximum tire width is 9 inches.
  3. The M-60 may be used as a right-rear option tire only.
  4. Grooving is not permitted. Grinding only. No grooving, needling or removal of material from the tire.
  5. Siping is permitted on M-30 and M-60 tires.
  6. Recapping an approved tire is not permitted.
  7. Track or DIRTcar officials may confiscate any tire at any time for evaluation, durometer verification or chemical analysis.
  8. Manufacturer identification markings may not be defaced or altered.
  9. Tire alteration may result in immediate suspension and other penalties.
  10. Tire softeners or chemicals designed to alter tire characteristics or the tire surface are not permitted.
Back to top

UMP / DIRTCAR STOCK CAR

Section 8 โ€” Wheels and Tires

  1. The tire rule may be amended by bulletin at any time.
  2. The only approved DIRTcar tires are the Hoosier M-30 and M-60 compounds. Maximum tire width is 9 inches.
  3. The M-30 or M-60 must be used on all four corners.
  4. Fully effective with the start of the weekly season.
  5. Siping and grinding are permitted.
  6. Grooving is permitted.
  7. Recapping an approved tire is not permitted.
  8. Track or DIRTcar officials may confiscate any tire at any time for evaluation, durometer verification or chemical analysis.
  9. Manufacturer identification markings may not be defaced or altered.
  10. Tire alteration may result in immediate suspension and other penalties.
  11. Tire softeners or chemicals designed to alter tire characteristics or the tire surface are not permitted.
  12. Only 8-inch racing wheels are permitted.
  13. Wheels must be conventional one-piece magnetic steel and mounted with lug nuts. Aluminum, plastic and carbon-fiber wheels are not permitted.
  14. All wheels must be fastened to the hub with five lug nuts.
  15. Bead locks are permitted on the right side only.
  16. Only approved wheel discs are permitted. They must use at least three 1/4-inch or 5/16-inch diameter magnetic-steel hex-head bolts.
  17. Approved wheel-disc fastening systems include Keyser Manufacturing #100 7-101; Wehrs Manufacturing WM377A-312 aluminum 5/16 or WM377S-312 steel 5/16; Triple X Chassis SC-WH-7810 for a 1-inch spring or SC-WH-7820 for a 1 3/8-inch spring; Pit Stop USA; and Smith Precision Products MC-516-18.
Back to top